Useful Things to 3D Print: Home, Desk, Kitchen and Garage
Useful things to 3D print, ranked by real MakerWorld print counts: bag clips, cable winders, Gridfinity bins, phone stands, pegboard hooks and more.
2026-11-16 · 5 min read · digcy.co

The most useful things to 3D print are small fixes for daily problems: bag clips, cable winders, phone stands, Gridfinity drawer bins and pegboard hooks. These are also some of the most printed models anywhere. The Mini Bag Clip alone has 141,631 prints on MakerWorld, more than almost any toy.
Below are the useful prints that real makers print most, grouped by room, with the right material for each. All print counts were checked on MakerWorld on November 16, 2026.
Useful 3D prints ranked by real print counts
| Useful print | Room | Top MakerWorld model | Prints | Best material |
|---|---|---|---|---|
| Bag clips and kitchen gadgets | Kitchen | Mini Bag Clip (fifindr) | 141,631 | PETG |
| Phone stands | Desk | Small smartphone stand, print in place (mgm86) | 101,110 | PLA or PETG |
| Cable organizers | Desk | Portable Cable Organizer / Winder (squinn) | 94,773 | PETG or TPU |
| Gridfinity bins | Garage, drawers | Gridfinity Superlight Baseplates (KYZ Design) | 79,004 | PLA |
| Headphone stands | Desk | Headphone holder modern Design (ngprint) | 54,821 | PETG |
| Desk organizers | Desk | Organizer Box, Parametric Storage Bin (Benjamin Kott) | 47,954 | PLA or PETG |
| Pegboard and SKADIS add-ons | Garage, craft room | IKEA Skadis (AU3D) | 42,744 | PETG |
| Planters | Home | Japandi Vases (SabreDesign) | 32,305 | PETG or matte PLA |
| Controller stands | Living room | Dual PS5 controller holder (PrinterMan) | 19,499 | PETG |
| Bookends | Home | Minimalistic Book Stand / Bookend (agentluca) | 16,309 | PLA |
| Cookie cutters | Kitchen | Winter cookie cutters (Amalthea) | 6,751 | PLA or PETG |
If you want fun prints instead of practical ones, see cool things to 3D print, which ranks 40 ideas including toys and lamps.
Useful things to 3D print for the kitchen
Kitchen prints get used every day, which is why they get printed so often.
- Bag clips. The Mini Bag Clip (141,631 prints) is quick and small. Print a batch of ten in different colors.
- Berry washers. Berry washer models have 60,000+ prints on MakerWorld.
- Plate scraper. The Plate Glider, a no-scratch scraper by Kong 3D, is trending this week with 670 prints in its first days.
- Napkin and paper towel holders. Two Christmas versions are on MakerWorld's trending feed right now.
- Cookie cutters. Custom shapes for parties and holidays. Hand wash only, and never in the oven.
Use PETG in the kitchen. It handles warm water and moisture better than PLA. Do not call a print "food safe." Layer lines can trap food, and most filaments and printers are not certified for food contact. For cutters, tell people to hand-wash and keep contact brief.
Useful 3D prints for your desk
A tidy desk is one of the most popular print projects. These all print in a few hours or less:
- Phone stand. The print-in-place stand prints in about an hour with working hinges.
- Cable winders and clips. Print in PETG or TPU so the clips flex instead of snap.
- Headphone stand. Use PETG, or PLA with 4 walls, and add rubber feet.
- Parametric storage bins. Parametric models let you set the exact width, depth and height for your drawer.
Match one filament color across every piece. A full set in black, white or wood tones looks planned instead of random.
Useful things to 3D print for the garage and workshop
This is where 3D printers save real money, because organizing systems sold in stores are expensive and never fit your exact tools.
Gridfinity
Gridfinity is an open standard of baseplates and bins that snap into a grid. The top baseplate has 79,004 prints. You can print bins for screws, bits and small parts, or custom cutouts for specific tools. The original standard is MIT-licensed, but many popular Gridfinity models on model sites are non-commercial, so check the license if you plan to sell.
Pegboard and SKADIS hooks
IKEA SKADIS add-ons are a whole category. One MakerWorld collection has 42,744 prints. Print hooks in PETG because they carry weight. PLA is fine for bins and cups. The same idea works for standard garage pegboards.
Useful home prints
- Planters. Use 2 to 3 walls and add a drip tray for real plants. Vase mode works for decorative pots.
- Bookends. Use heavy infill or a steel insert so they actually hold books.
- Controller stands. Test the fit with the real controller before printing a set.
- Lamps. Bambu Lab's LED Lamp 001 has 60,103 prints. Use a certified USB LED puck.
Which printer for useful prints?
Every item here fits a 256 mm bed like the Bambu Lab A1's, and the small ones (clips, cable winders, phone stands, cookie cutters) fit the A1 mini's 180 mm bed. PETG prints well on open printers. An enclosure only matters for materials like ABS and ASA, which you do not need for this list. Compare models on our Bambu Lab, Prusa and Creality pages, or see Bambu Lab A1 projects.
Can you sell useful 3D prints?
Yes, but be careful where you compete. On Etsy's first results page (checked Nov 16, 2026), many searches for useful prints are mostly digital files, not physical items:
| Search | Physical listings | Digital file listings | Median physical price |
|---|---|---|---|
| Kitchen organizers | 8 | 53 | $25.99 |
| Pegboard accessories | 15 | 46 | $13.65 |
| Gridfinity bins | 16 | 42 | $16.79 |
| Cable organizers | 33 | 27 | $12.59 |
| Headphone stands | 36 | 22 | $45.86 |
| Desk organizers | 25 | 32 | $26.23 |
Fewer physical listings can mean less competition for finished products. It can also mean buyers in that search mostly want files. Sell bundles that save time: a 20 to 30 piece pegboard starter kit, or a full Gridfinity drawer kit sized to a popular toolbox. Read 3D prints that sell for the full breakdown, and use the pricing calculator before you set a price.
FAQ
What is the most useful thing to 3D print?
By real print counts, the Mini Bag Clip leads useful prints with 141,631 prints on MakerWorld, followed by a print-in-place phone stand (101,110) and a portable cable winder (94,773).
What filament is best for useful 3D prints?
PETG for anything that sees heat, water or weight, like kitchen gadgets and pegboard hooks. PLA is fine for bins, bookends and desk organizers. TPU works for flexible cable clips.
Are 3D printed kitchen items food safe?
Do not assume so. Layer lines trap food, and most printers and filaments are not certified for food contact. Use prints for things like bag clips and holders, and keep contact with food brief.
What should I 3D print to organize my garage?
Gridfinity bins and baseplates for drawers, and SKADIS or pegboard hooks for walls. Print hooks in PETG so they hold weight.
Data sources: MakerWorld public model pages, Etsy search results (US) and public shop pages, Google Trends and Ahrefs, checked 2026-11-16. Images are AI illustrations.


