xTool
Edge-lit acrylic night lights on a xTool
Yes: the P2S can make edge-lit acrylic night lights. Engraved clear acrylic on an LED base. Cheap parts, glowing results.
Typical Etsy price$21
Middle half of prices$15–$28
Material per piece~$6
Machine time per piece18 min
Physical listings sampled57
Top results that are digital files0 / 57

Which xTool models can laser engrave it
| Model | Can it? | Notes |
|---|---|---|
| F1 galvo, about 115 × 115 mm | No | clear acrylic needs a CO2 laser |
| F1 Ultra galvo, about 220 × 220 mm | No | clear acrylic needs a CO2 laser |
| S1 enclosed, about 498 × 319 mm | No | clear acrylic needs a CO2 laser |
| M1 Ultra 4-in-1 craft machine | No | clear acrylic needs a CO2 laser |
| P2S 55 W CO2, about 600 × 308 mm | Yes | good fit |
Tips for xTool owners
- Needs: a CO2 laser for clear or mirror acrylic.
- Material cost about $6 per piece, about 18 min of machine time.
- Best results: Clear acrylic (CO2 laser) engraved in reverse, slotted into an LED base.
xTool is the fastest-growing laser brand in the US: its IPO filing reports 405,000+ connected devices and more than half of revenue from the US. The F1 galvo is the go-to for fast small-batch engraving, the P2S for CO2 cutting. All xTool ideas.
Specs are approximate public figures; check the xTool site before buying.
Other machines:



