xTool
Pet tags & memorials on a xTool
Yes: the F1, F1 Ultra can make pet tags & memorials. Metal pet tags need a fiber or IR laser. Memorial stones work on any laser.
Typical Etsy price$17
Middle half of prices$10–$22
Material per piece~$1.50
Machine time per piece3 min
Physical listings sampled55
Top results that are digital files1 / 56

Which xTool models can laser engrave it
| Model | Can it? | Notes |
|---|---|---|
| F1 galvo, about 115 × 115 mm | Yes | good fit |
| F1 Ultra galvo, about 220 × 220 mm | Yes | good fit |
| S1 enclosed, about 498 × 319 mm | Partly | bare metal needs fiber/IR: use anodized aluminum or marking spray |
| M1 Ultra 4-in-1 craft machine | Partly | bare metal needs fiber/IR: use anodized aluminum or marking spray |
| P2S 55 W CO2, about 600 × 308 mm | Partly | bare metal needs fiber/IR: use anodized aluminum or marking spray |
Tips for xTool owners
- Needs: a fiber or IR laser for bare metal.
- Material cost about $1.50 per piece, about 3 min of machine time.
- Best results: Anodized aluminum or stainless tags. Bare metal needs fiber/IR; diode/CO2 can mark anodized aluminum or use marking spray.
xTool is the fastest-growing laser brand in the US: its IPO filing reports 405,000+ connected devices and more than half of revenue from the US. The F1 galvo is the go-to for fast small-batch engraving, the P2S for CO2 cutting. All xTool ideas.
Specs are approximate public figures; check the xTool site before buying.
Other machines:



