Glowforge
Slate signs & plaques on a Glowforge
Yes: the Pro, Plus, Aura can make slate signs & plaques. Slate engraves bright white with no finishing. House numbers, memorials, cheese boards.
Typical Etsy price$22
Middle half of prices$18–$42
Material per piece~$7
Machine time per piece18 min
Physical listings sampled53
Top results that are digital files3 / 56

Which Glowforge models can laser engrave it
| Model | Can it? | Notes |
|---|---|---|
| Pro 45 W CO2, about 495 × 279 mm, pass-through slot | Yes | good fit |
| Plus 40 W CO2, about 495 × 279 mm | Yes | good fit |
| Aura craft diode laser | Yes | good fit |
Tips for Glowforge owners
- Needs: no special hardware: any diode or CO2 laser works.
- Material cost about $7 per piece, about 18 min of machine time.
- Best results: Natural slate blanks; engrave at low power. Seal with mineral oil for a dark finish.
Glowforge made desktop CO2 lasers mainstream and has a huge base of owners. Its CO2 machines cut clear acrylic, wood and leather well, but there is no official rotary attachment for tumblers. All Glowforge ideas.
Specs are approximate public figures; check the Glowforge site before buying.
Other machines:



